Auto Tuning Feature - RCA HD50LPW167 User Manual

4
Main Menu Parental Controls
0
Go Back
Front Buttons Blocked
1
Lock TV Front Buttons Unblocked
2
Video Input List
When the buttons on the TV are blocked and the TV is
3
Cable Channel List
locked, only the remote will control the TV. This keeps
children from playing with the buttons. It also keeps
4
Antenna Ch. List
children from watching TV when a guardian is not
present (you must hide the remote for this to be effective.)
5
USA V-Chip
Note: If power to the TV is lost for a prolonged time (e.g.,
6
Canada V-Chip
due to a power outage) the buttons become unblocked.
7
V-Chip Unrated
8
Front Button Block
Press OK to block (disable) the buttons on the front of the TV.
Only the remote will control the TV.
4
Main Menu Connections
0 Select which input or channel should be automatically tuned
Go Back
when a button listed below is pressed on the remote control.
1
Signal Strength
VCR
2 Front Input
Channel Search
VCR2
3
Signal Source
Not Connected
4 DVD
Auto Tuning
Input 2
5
Special Features
SAT-CABLE (Satellite or Cable Box)
Not Connected
Press OK to select the channel or input that is tuned when
the VCR key is pressed on the remote.
learning
TV
DVD VCR
SAT AUX
/
CAB
With the Auto Tuning feature, you can set up
the TV to tune to the channel or input you want
to watch by pressing that device's button. Auto
Tuning for the TV button cannot be set.
Chapter 3
AUDIO (Audio Receiver/Amp)
Not Connected
RCA SAT2
Not Connected
ON-OFF
AUDIO
Using the TV's Features
Front Button Block
Selecting this option lets you block (disable) or unblock (enable) the TV's
front buttons. The remote still tunes to any channel. Front Panel Block
can:
• Keep children from watching TV when the parent is not present.
• Keep young children from playing with the buttons on the TV.
(When using this as a Parental Control method, you should remove
access to any remote that is capable of operating the television.)
Don't forget to lock the TV after you select Blocked. If you do not, the
front panel block will not take effect.
Note: If power to the TV is lost for an extended period, the buttons
become unblocked. Blocking the front buttons does not disable the
front input jacks.

Auto Tuning Feature

The way you set up the Auto Tuning feature in the TV's menu
corresponds to the device buttons on the remote and the way you have
each device connected to your TV. When you set auto tuning, you're
telling the TV what channel or input to tune to when you press the VCR,
DVD, AUDIO, AUX, or SAT•CABLE button on the remote control. This is
especially useful for going directly to an input like
HDMI/DVI.
Notes: The AUX button by default is set up for an RCA HDTV Tuner
receiver.
If you have two RCA satellite receivers, you can control each separately.
Program the second receiver with the AUX button using the 5001 code.
Then use the RCA SAT2 option in the auto tuning menu to set auto tuning.
1. Press MENU (the Main Menu appears).
2. Highlight Connections and press OK.
3. Highlight Auto Tuning and press OK.
4. Highlight the device button fi eld and continually press OK to scroll
through the selection of inputs.
The choices and a brief explanation follow:
Not Connected Choose this if you don't have this particular device
connected to the TV, or if you don't want the TV to automatically tune
to the correct channel when you press one of the device buttons on the
remote.
Channel 2, 3 or 4 Cable Input
INPUT jack on the back of the TV, and you want the TV to tune to
channel 2, 3, or 4 when you press the corresponding button on the
remote. Reminder: make sure the device's Channel 2/3 or 3/4 switch is
set to match the channel you choose in Auto Tuning.
Device is connected to the CABLE
61