Gewiss Chorus GW 10 862 User Manual page 43

The push-button panel does not display the operating mode status of the control unit once
the commands have been transmitted
USER INSTRUCTIONS
Operation procedures
GW 10/12/14 862 - GW 10/12/14 867
Press one of the buttons for more than one
second. The transponder area lights up for around
10 seconds, and the internal buzzer is activated.
Approach the proximity key to the transponder;
the function buttons flash and the transponder
pilot light remains on.
Press one of the flashing buttons relative to the
command to be sent to the control unit
Total Arming
push-button
Total Disarming
push-button
43
Partial day mode
arming push-button
Partial night mode
arming push-button
I
T
A
L
I
A
N
O
E
N
G
L
I
S
H