Gewiss Chorus GW 10 862 User Manual page 34

EXTERNAL VIEW OF THE PUSH-BUTTON PANELS
The GW 10/12/14 862 - GW 10/12/14 867 push-button panel is always in energy-saving
idle mode, before performing any operation, it is necessary to press one of the control
buttons for a few seconds.
- Transponder to position the GW 20 474 proximity key for user identification. When
the memorized GW 20 474 key is in position, the vertical slots light up.
- The function push-button group, is used to send commands relative to general
arming, NIGHT MODE arming, DAY MODE arming and disarming. Before pressing any
of the command push-buttons, it is necessary to perform user identification, placing
the GW 20474 proximity key in the centre of the transponder (vertical slots).
USER INSTRUCTIONS
Push-button panel and display
34