Lock switch
The Lock switch is discreetly located under the Attention Tracker. When
n
pressed this switch prevents any of the switch panel settings being
changed. Press the lock button once to disable changes to the switch
settings. In this mode only the Start switch will operate. To re-enable switch
settings, press the lock button once more.
Remote control operation
The slide switch on the remote control selects which of up to four main units
n
is being controlled (There is a matching switch on the base of the Attention
Tracker to set a unique channel).
Pressing the Up button on the remote control rewards by increasing
n
the points count (or time remaining, if in timer countdown mode) on the
selected unit by the number of points selected by the reward switch.
Pressing the Down button on the remote control decreases the points count
n
(or time remaining, if in timer mode) on the selected unit by the number of
points (seconds) selected by the reward switch.
The LED on the remote will flash briefly when the buttons are pressed to give
feedback to the user.