Table of Contents
Advertisement
Problem
Busy/Reorder tone
(cont.)
Phone number
dialed, but did not
go through
Phone does not ring
Sound volume is too
low
Poor reception
Dial tone in middle
of call
12
Solution
4. The antenna or other
QGFSP components may be
broken or damaged.
Weather conditions may be
making phone transmission
difficult. Contact your
service provider.
5. Your unit may have power,
but not be able to connect
with the Globalstar system.
Contact your service
provider.
1. Check the telephone
number. You may have
misdialed or dialed incorrect
numbers.
2. The telephone you are
dialing may be busy.
1. You may have connected too
many telephones.
2. Check the ringer volume
switch (if your phone has
one) and set it to ring louder.
3. Verify that the telephone is
set to tone, not pulse.
4. Be sure your telephone is
plugged into the jack
correctly.
Another telephone in your
building may be off the hook.
Hang up the extension.
Check the telephone wiring
inside your building. Worn or
poor quality telephone wiring
may need to be replaced.
The call has been lost. Hang up,
then dial again and attempt to
reestablish the call.
Advertisement
Table of Contents
