Getting Started with your Dell TrueMobile 1300 Wireless USB Adapter: Dell TrueMo...
Back to Contents Page
Getting Started with your Dell TrueMobile 1300 Wireless
USB Adapter:
Dell™ TrueMobile™ 1300 Wireless USB Adapter User's
Guide
NOTE: If you did not purchase this device with a new Dell system, please start at step 1.
If you purchased this device with a new Dell system, please skip to step 2.
To complete the setup of your TrueMobile 1300 Wireless USB Adapter, perform the following 3
steps:
1. Installing the software (drivers and Dell Wireless Configuration Utility)
2. Connecting the device to the computer
3. Connecting to your wireless network
1. Installing the Software
NOTE: This installation is required before connecting the device to the system.
a. Insert the Dell TrueMobile 1300 Wireless USB 2.0 Adapter CD into the CD or DVD
drive of your computer. If the Main Menu screen does not appear automatically, select
Start-->Run and then type x:\setup.exe (where x:\ is your CD-ROM drive letter) and click
OK.
b. Click on Install Software.
c. The wizard will install the Dell Wireless Configuration Utility and the driver for your device.
Back to Top
2. Connecting the Dell TrueMobile 1300 Wireless USB Adapter to Your Computer
a. Connect the small connector of the USB cable to the connector in the Dell TrueMobile
1300 Wireless USB Adapter as shown in Figure 1.
file://C:\Documents%20and%20Settings\dsarired\My%20Documents\projects%20200...
Page 1 of 4
30-9-2003