Electristove hologram genesis electric stove (20 pages)
Summary of Contents for Celsi PURAFLAME G2
Page 1
MODEL- CESLPFRE CELSI PURAFLAME G2 LARGE STOVE B-180870 Packing Check list Package 1 1 off Electric stove 1 off Remote control handset 2 off AAA batteries 1 off Instructions manual IMPORTANT This appliance can be used by children aged from 8 years and above and persons with reduced...
SECTION 1: IMPORTANT SAFEGUARDS WARNING: This heater is not equipped with a device to control the room temperature. Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided. CAUTION —...
SECTION 2: TECHNICAL SPECIFICATION Power Supply 230VAC 50Hz General Power 2000W Heat Power 1000W 2000W Flame Effect Heater has an over heating power cut off safety feature. SECTION 3: STRUCTURE AND PARTS...
SECTION 4: INSTALLATION INSTRUCTIONS This stove must be installed by a qualified, competent person. 4.1 Location 1. The stove must have a minimum clearance of 50mm to combustible material on all sides. A clearance of minimum 50mm to non-combustible materials is also required to ensure correct operation.
SECTION 5: OPERATING INSTRUCTIONS CAUTION! THE UNIT’S POWER CORD MUST BE CONNECTED TO A PROPERLY EARTHED AND PROTECTED 240V OUTLET. ALWAYS USE EARTH FAULT PROTECTION WHERE REQUIRED BY THE ELECTRICAL CODE. This appliance can be operated by both a remote control and a manual keypad. Once the unit has been properly connected to an earthed electrical socket-outlet ensure the manual On/Off switch, located on the right hand side of the appliance, is in the ‘ON’...
Unlike most remote handsets which require the tip of the handset to be pointed towards the appliance the Celsi handset transmits from the underside as shown below. This prevents the requirement to rotate and point the...
5.2.1 Button Description The functionality fo the buttons described below is the same for both the remote control handset and the manual keypad. ON/STANDBY: This button is used turn the fire ON or OFF. MUTE: This button is used to mute the sound or restore the sound.
5.2.3 How to use the thermostat Press the button to put the appliance into thermostat mode. NOTE: When this button is pressed the appliance will fall out of manual heat mode if previously set. When running in thermostat mode the unit will regulate the heat setting automatically between high and off in order to maintain the comfort level selected.
To access each of the functions simply continue to press the ‘FUNC’ button until the required function is displayed. The icon will stay on screen for 3seconds. If no other buttons are pressed during this time, the icon will disappear from the screen and continue to run with its current setting. buttons can be used to change each function setting.
5.2.4.4 How to change the Mood Lighting (Not applicable on this model) Press the ‘FUNC’ button as described above to display the mood lighting icon is on the screen. Press the buttons to change the mood lighting. There are 4mood lighting settings to choose from(including off) and you will see the mood lighting change as you scroll through the options .
Once the desired sleep timer is selected wait for 3 seconds for the on screen icon to disappear. The sleep timer is now set. IMPORTANT NOTES REGARDING THE USE OF THE SLEEP TIMER Once the sleep timer has been changed from ‘OFF’ to any of the 8 available sleep timer setting, the appliance will now continue to run for the selected time.
SECTION 7: ENVIRONMENT This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
Need help?
Do you have a question about the PURAFLAME G2 and is the answer not in the manual?
Questions and answers