Bypassing Protected Areas; Change Time And Date; Chimes And Beeps; Reset - ADT Safewatch Quick Connect Plus Quick Manual

Loss of AC power and use of backup battery power is indicated by No AC.

A low battery condition is indicated by Low Bat.

For instructions on replacing your battery, please visit our


Bypassing Protected Areas

Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to
access a protected area when the system is armed.
To bypass a zone, enter your [security code] + [BYPASS] + [2-digit zone number].

To unbypass a zone, enter your [security code] + [OFF].


Change Time and Date

Enter your [Master code] + [FUNCTION] + [6] + [3].

When 'SET TIME' appears, enter the 2-digit hour, i.e., 18 for 6:00.

Press [ADD] and choose [1] for PM or [0] for AM, then press [ADD] again.

Enter the 2-digit minute, i.e., 14 for 6:14, then press [ADD].

Enter the 2-digit month, i.e., 03 for March, then press [ADD].

Enter the 2-digit day, i.e., 23 for March, 23, then press [ADD].

Enter the 2-digit year, i.e., 15 for March 23, 2015, then press 'ADD] to accept the entry and exit Clock-

Setting mode. The keypad will beep 4 times in confirmation.

Chimes and Beeps

When your system is in chime mode, a chime will sound three beeps whenever a protected door/window is
opened.
To turn the door chime function on and off, press [FUNCTION] + [CHIME].


Reset

To clear the display after an alarm event, enter your [security code] + [OFF] to clear the alarm event history.
Battery Replacement Page.