Advertisement
Playing a Disc
This user manual explains the basic instructions
refer to the instructions accompanying the
for operating this unit. Some DVDs are
specific DVD in question for more information
produced in a manner that allows specific or
about the options available on that DVD.
limited operation during playback. Therefore,
may appear on the screen during operation.
this unit may not respond to all operating
It means that the desired operation is not
commands. THIS IS NOT A DEFECT. Please
permitted by the unit or disc.
Playing a Disc
1. Press the STANDBY / ON button to turn on the unit. (See CUSTOMIZING THE FUNCTION
SETTINGS before proceeding to step 2).
2. Press the
OPEN/CLOSE button to open the disc tray.
3. Place a disc onto the disc tray with the label side up.
4. Press the
OPEN/CLOSE button to close the disc tray. It takes a short while for your unit to load
the disc. After loading, for most DVDs, the unit will automatically take you main menu or start
playing.
5. If the unit does not automatically start playing the DVD, press the
PLAY button.
Pausing Playback (Still Mode)
Press the
PAUSE button on the remote. To resume normal playback, press the
PLAY button.
Each time you press the
PAUSE button, the picture advances one frame.
Stopping Playback
• Press the STOP button at the location where you want to interrupt playback. To resume playback
at the position where the disc was stopped, press the
PLAY button.
• If you press the
STOP button twice, the unit's memory will be cleared and pressing the
PLAY
button will reset the disc to the beginning.
Zooming into an image
While a disc is playing, press the ZOOM button to enlarge the image in several levels.
• While an image is zoomed, you can use the
,
,
or
CURSOR button to shift the view and
display the part you want.
• To return to normal view, press the ZOOM button repeatedly until the
is displayed.
• When you reach the edge of the image, the display will not shift anymore in that direction.
Skipping (Forward / Reverse)
• Press the
PREV button to go back to current or previous chapters/tracks.
• Press the
NEXT button to advance chapters/tracks.
• For audio CDs, use the number buttons on the remote control to jump immediately to the desired
track number.
Fast Forward / Fast Reverse
1. Press the SEARCH
or SEARCH
button when a disc is playing. Each time you press the
SEARCH
or SEARCH
button, the playback speed changes.
2. Press the
PLAY button when you reach the desired point to resume normal playback.
Note:
• The unit mutes sound and subtitles during reverse and forward scan of DVDs.
• The fast playback speed may differ depending on the disc.
Slow-motion Play
1. Press the SLOW button on the remote in play mode.
• Each time the SLOW button is pressed, the speed of slow-motion playback changes.
2. Press the
PLAY button to return to normal playback speed.
Audio Selection
On some DVDs, the sound is recorded in two or more formats. Follow the directions below to select
the preferred language and sound system.
1. While a disc is playing, press the AUDIO button to show the current audio format number.
2. Press the AUDIO button repeatedly to select the desired audio format.
Note:
• If only one audio format is recorded on the DVD, the number does not change.
• Some DVDs allow you to change audio selections only via the disc menu. If this is the case, press
the MENU button and choose the appropriate language on the disc menu.
• You can select different audio channels on an Audio CD by pressing the AUDIO button
repeatedly.
Subtitle Selection
1. While a DVD is playing, press the SUBTITLE button to display the current language setting.
2. Press the SUBTITLE button repeatedly to select the desired subtitle language. You can turn
subtitles off by pressing the SUBTITLE button repeatedly until the "Off" is displayed.
Note:
• Some DVDs are set to display subtitles automatically, and you cannot turn them off even if you set
the subtitle function to off.
• During some scenes, the subtitles may not appear immediately after you select your desired
scene.
• The number of subtitle languages recorded differs depending on the disc. If only one language is
recorded, the language does not change.
• This function can only be used for discs on which subtitles have been recorded in multiple
languages.
• Some DVDs allow you to change subtitles only via the disc menu. If this is the case, press the
MENU button and choose the appropriate subtitle on the disc menu.
Angle Selection
Some DVDs contain scenes which have been shot from a number of different angles. For these discs,
the same scene can be viewed from each of these different angles.
1. While you are playing a DVD with different angles recorded, press the ANGLE button to view the
number of current angles available.
2. Press the ANGLE button repeatedly to change the scene to the next recorded angle.
• After approx. two seconds, playback will continue from the new angle you selected.
• If no button is pressed within 10 seconds, playback continues without changing the current angle.
Note:
• This function can only be used for discs on which scenes shot from multiple angles have been
recorded.
• If only one angle is recorded,
is displayed.
- 6 -
DRC288SU IB ENG.indd 2
Display Function
While the disc is playing, press the DISPLAY button on the remote control repeatedly to display
information on operation status.
Elapsed Time: Elapsed time from the beginning of the chapter/title which is currently playing.
Remaining Time: Remaining time of the chapter/title which is currently playing.
locating a DesireD section
Locating a specific chapter / track / title / time
If you know the chapter / track / title / time number you want to play, you can locate a specific chapter
/ track / title / time by directly selecting a chapter / track / title / time number.
1. Press the GOTO button to search your desired chapter / track / title / time.
2. Press
or
button to highlight a chapter / track / title / time and press the corresponding number
button(s) for the chapter / track / title / time you want.
3. Press the OK button to confirm. The unit will start playback about 3 seconds later.
Note:
• Some discs may not respond to this process.
• Some scenes may not be located as precisely as you specified.
• This method for accessing specific locations is available only within the current title of the DVD
disc.
Programmable memory
Playing Titles/Chapters in a Favorite Order
e.g. DVD
You can combine your favorite titles/chapters and play them
in the order you determine.
1. Press the MEMORY button and a program screen
appears.
2. Select the items in the order you want by pressing the
number buttons. Each time you press the Cursor buttons
( ,
,
,
), the space is highlighted. Highlight where
you want to enter, then press the corresponding number
buttons.
3. Press the Cursor buttons ( ,
,
,
) to move the
highlighted bar to
, then press the
PLAY or OK
button. The DVD player starts memory playback.
e.g. Audio CD
4. To resume normal playback from memory playback
a) Press the MEMORY button in stop mode.
b) Press the Cursor buttons ( ,
,
,
) to move the
highlighted bar to "Clear", then press the OK button. All
the input programs will be cleared.
c) Press the
PLAY button to resume normal playback.
Note:
• If the title or chapter numbers you entered is not permitted
by the DVD, after you press the OK button, it will restore to [- -]. You should re-enter correct
numbers.
• Some discs may not permit memory playback operation.
• If you select repeat during memory playback, the DVD player repeats the current memory
playback.
• If you press the MEMORY button while the display appears on the TV screen, the display
disappears.
• The programmed selections will be cleared when you open the disc tray or turn off the DVD
player.
- 7 -
Playing DivX
®
ViDeo or Picture Files
This unit can play DivX® and picture files stored on USB flash drives, SD cards, CD-R/CD-RW,
DVD+R/-R or DVD+RW/-RW discs.
To play video files on this product you must first convert them to DivX format using
the DivX Plus Player on your PC or MAC. This application can be downloaded at
www.divx.com. Please do so, and then install on your PC or MAC.
Playing DivX ® Video/ Picture Files
If playing DivX video or picture files from a USB drive or SD
card, see note below.
1. Press SOURCE key to select DISC mode after turning on
the unit.
2. Open the disc door.
3. Place a DivX
®
/ picture file disc onto the tray with label side
up.
ENTER
4. Close the disc door.
5. A selection menu will appear on the screen.
6. Press
or
button to select the picture
or video
icon, and then press OK.
If picture mode is selected, use below to nevigate the menu:
/
: selects a file
/
: page up or down
RETURN : returns to previous menu
ENTER : plays your selected file
Note:
• For playing files on USB flash drive or SD card, you should
plug in the USB flash drive or SD card when the unit is in
STANDBY mode. Press SOURCE button, select USB or
Card mode, then follow step 6 above.
• You can press the
PAUSE button to interrupt playback,
and press the
PLAY button to resume playback.
• You also can use the GOTO button or use the numbered buttons to enter a photo number and
quickly select any image.
• During picture playback, you can press ANGLE button repeatedly to rotate the picture.
ABOUT DIVX VIDEO: DivX
®
is a digital video format created by DivX,Inc. This is an official DivX
Certified device that plays DivX video. Visit www.divx.com fo more information and for software tools
to convert your files into DivX video.
®
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified
device must be registered in order to play
DivX Video-on-Demand (VOD) content. To generate the registration code, go to the DivX VOD section
in the device setup menu. Go to vod.divx.com with this code to complete the registration process and
learn more about DivX VOD.
®
®
DivX Certifed
to play DivX
video, including premium content.
rePeat PlaybacK
You can play a specific title or chapter repeatedly. (Title repeat, chapter repeat, A-B repeat)
Repeating a chapter
You can play the same chapter repeatedly.
1. While the disc is playing, press the REPEAT DISC button until the
indicator
displays on the screen. The current chapter is played repeatedly.
Repeating a title
You can play the same title repeatedly.
2. While the disc is playing, press the REPEAT DISC button until the
indicator displays
on the screen. The current title is played repeatedly.
To resume normal playback
3. While the disc is playing, press the REPEAT DISC button until the
indicator displays
on the screen.
You can play a single track and whole disc repeatedly.
Repeating a single track
You can play the same track repeatedly.
1. While the disc is playing, press the REPEAT DISC button until the
indicator displays
on the screen. The current track is played repeatedly.
Repeating a whole disc
2. While the disc is playing, press the REPEAT DISC button until the
indicator displays
on the screen. The whole disc is played repeatedly.
To resume normal playback
3. Press the REPEAT DISC button until the
indicator displays on the screen.
You can play a specific section repeatedly.
Repeating a specific section
1. While the disc is playing, press the REPEAT A-B button at the beginning of the section (
is
displayed) you want to play repeatedly.
2. Press the REPEAT A-B button again at the end of the section (
is displayed).
3. The unit will immediately begin replaying your selection.
To resume normal playback
4. While the disc is playing, press the REPEAT A-B button until the
indicator displays on
the screen.
Note:
• Some discs may not permit A-B repeat operation.
• A-B repeat can only be used within the same title. If the start and end of the section to be repeated
are in different titles, A-B repeat is cancelled.
• You can specify a segment only within the current title or track.
• The A-B repeat function does not operate in scenes where different camera angles are recorded.
- 8 -
customizing the Function settings
LANGUAGE SETUP
1. Press the SETUP button in stop mode.
2. Press
button to select Player Menu, Subtitle, Audio
and Disc Menu.
Language
3. Press
button, then use
/
button to select your
preferred language.
Player Menu
4. Press the OK button to confirm.
Subtitle
5. Press the SETUP button to exit the menu.
Audio
Disc Menu
Note:
• Some DVDs may be set to display subtitles in a
different language other than the ones you selected.
A prior subtitle language may be programmed on the
disc.
• Some DVDs allow you to change subtitle selections using the disc menu only. If this is the case,
press the MENU button and choose the appropriate subtitle language from the selection on the disc
menu.
• Some DVDs may not be played in the language you selected. A prior language may be programmed
on the disc.
• Some DVDs may not include your pre-selected language. In this case, the DVD player automatically
displays disc menus consistent with the disc's initial language setting.
VIDEO SETUP
1. Press the SETUP button in stop mode.
2. Press
button to select Video.
Video
3. Press
/
button the setting item: Aspect Ratio,
Aspect Ratio
HDMI Res. or JPEG Interval.
HDMI Res.
4. Press
button, then use
/
button to select the
JPEG Interval
setting choice on the right.
5. Press the OK button to confirm.
6. Press the SETUP button to exit the menu.
Aspect Ratio
Depending on the format of the DVD disc, you can choose the picture format
(aspect ratio) best suited the format of your TV screen.
4:3 LB
• When wide-screen video is played in this mode on a conventional screen,
black bands appear at the top and bottom of the screen.
4:3 LB
4:3 PS
• When wide-screen video is played, this mode clips the right and left sides
of the image so that it can be viewed on a conventional screen.
• Some wide-screen DVDs that do not permit Pan Scan mode playback are
automatically played in letterbox mode (black bands that appear at the
top and bottom of the screen).
16:9
• This is the correct mode for playing wide-screen videos on the unit or
4:3 PS
other external wide-screens.
Note:
• The displayable picture size is preset on the DVD. Therefore, the playback
picture of some DVDs may not conform to the picture size you select.
• When you play DVDs recorded in the 4:3 picture size only, the playback
picture always appears in the 4:3 picture size regardless of the Aspect
Ratio setting.
16:9
• Select 16:9 to conform to the LCD screen on the unit. Always be sure that
your Aspect Ratio conforms to the actual TV in use if you connect the unit to a TV.
HDMI Res. (Resolution)
You can set the HDMI Res. (Resolution) to be Auto, 480p, 720p, 1080i or 1080p, according to the
connected TV.
Note:
• Select the HDMI resolution according to the performance of the connected TV.
• If the Video out is not set to HDMI, you cannot select the HDMI Res.
JPEG Interval
To set the JPEG Interval for slide show playback. Select Off to disable the slide show feature.
Off:
Plays back one file at a time.
5 seconds
Plays back images in the form of a slide show at 5 seconds interval.
10 seconds Plays back images in the form of a slide show at 10 seconds interval.
15 seconds Plays back images in the form of a slide show at 15 seconds interval.
- 9 -
AUDIO SETUP
1. Press the SETUP button in stop mode.
2. Press
button to select Audio.
Audio
3. Press
/
button the setting item: Digital Out or
Night Mode
Digital Out
4. Press
button, then use
/
button to select the
Night Mode
setting choice on the right.
5. Press the OK button.
6. Press the SETUP button to exit the menu.
Digital Out
Selects the output sound format corresponding to your system connection.
PCM(STEREO):
Select when connected to a Multi-channel digital stereo amplifier.
RAW (DVD FORMAT):
Disc audio raw data will be output.
Note:
If you connected to a TV using HDMI, and are using the TV's speakers for audio playback, make sure
to select "PCM (STEREO)".
Night Mode
Night mode is equivalent to Dynamic Range Compression. If turned on, "Night Mode" will limit the
volume on loud passages of movies (such as action sequences) while still allowing you to hear quiet
passages (such as dialog).
Note: Night mode is Dynamic Range Control (DRC) option for analog audio output.
SYSTEM SETUP
1. Press the SETUP button in stop mode.
2. Press
button to select System.
3. Press
/
button the setting item: Default, View
DivX(R) VOD or Screen Saver.
Default
4. Press
button, then use
/
button to select the
View DivX(R) VOD
setting choice on the right.
Screen Saver
5. Press the OK button.
6. Press the SETUP button to exit the menu.
Default
Resets all settings to their initial factory state.
Note: It will take 3-5 seconds to reset the DVD player to the factory default.
View DivX(R) VOD
DivX ® Registration
DivX ® registration code allows you to rent and purchase movies using the DivX ® VOD service from
the internet. This menu setting will display the registration code of your unit as follows:
YOU MUST REGISTER YOUR DEVICE TO PLAY
DIVX PROTECTED VIDEOS.
REGISTRATION CODE:
REGISTER AT HTTP://VOD.DIVX.COM
Go to the website http://vod.divx.com to activate your DivX registration code.
This website will also give you information on how to purchase and download movies, and how to
enable video content to be played on your product. You will have the options of transferring content
to a USB flash drive, SD card or disc (CD-R/RW, DVD+R/-R or DVD+RW/-RW ) for playback on your
product.
Note:
• This registration code is for DivX ® Video-On-Demand only. Do not apply this code for other
applications or websites.
• If you have already registered this product, selecting the View DivX(R) VOD setting will allow you to
deregister (deactivate) the product for DivX playback - we recommend you DO NOT deregister
the product.
Screen Saver
To turn on or off the screen saver (screen protection to prevent image burn).
Note: When you leave the unit in DVD stop mode for approxiamtely 5 minutes, the screen saver of
the unit automatically appears if you set the Screen Saver to On mode. To turn off the screen saver,
press the PLAY button.
Specifications and external appearance are subject to change without notice.
Note: See section 3 (on other side of this sheet) for Troubleshooting Guide.
Need more help?
www.RCAav.com
Please visit online help at
AVC Multimedia
Markham, Ontario L3R 1E3
© 2010 AVC Multimedia
http://www.RCAav.com
Printed in China
811-288S91W011
- 10 -
5/12/2010 12:19:17 PM
Advertisement
