Table of Contents
Advertisement
Attach the Strap
Dropping a camera can cause serious damage both
internally and externally. So, to secure your investment,
attach the hand strap first thing, and use it every time.
1. Insert the small loop at the end of the strap under the
strap eyelet.
2. Insert the other end of the strap through the loop to tie
the strap onto the strap eyelet.
Power Supply
This digital camera features two ways to supply
power to it; either use two batteries (size AA) or the
included AC adapter.
Inserting
Batteries
.
On the bottom of the camera, slide the battery
chamber cover out in the direction of the large
arrow to open it. A click can be heard when the
compartment is released.
2. Insert two (2) AA batteries. Make sure to match the
positive and negative ends of the batteries to the
markings inside the battery compartment.
3. Close the battery chamber cover by pushing down
fh-rnly and sliding it back until the latch closes with a
click.
Inserting the Hand Strap
The supplied AC adapter
The battery compartment
Important
Notes!
• Never use manganese batteries.
• Your camera will not work if the batteries
are inserted incorrectly.
• Remove batteries from camera if it will not be used for an extended
period of time.
• Never mix old batteries
with new ones.
• Never mix batteries of different types.
• Never destroy batteries or dispose of by fire. Doing so can cause an
explosion
or leak caustic materials into the environment_
5
Advertisement
Table of Contents
