Download
Share
Print this page
  1. Manuals
  2. Brands
  3. AAD Manuals
  4. Speaker System
  5. 7001
  6. Owner's manual

AAD 7001 Owner's Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
7001 LOUDSPEAKER
OWNER S MANUAL
'

Advertisement

loading

Summary of Contents for AAD 7001

  • Page 1 7001 LOUDSPEAKER OWNER S MANUAL...
  • Page 2 Any character of the speaker will be from the recording of the music you are listening to. The 7001 will only perform at its best with the purist audio signal possible. Small power amplifiers are out of the equation.

  • Page 3: Single Wiring

    7001 7001 The 7001 speaker stand offers the best performance with the speaker. The optimum height of a listener’s head should be the same as the speaker baffle center. YOUR HEAD SHOULD BE AT SAME HEIGHT AS CENTER OF SPEAKERS WIRING UP YOUR SPEAKERS Speakers and electronics terminals have corresponding (+) and (-) terminals.
  • Page 4 BI-WIRING The bi-wire connection method requires one amplifier and two sets of speaker wires. By removing the shorting bars, connections may be made to the individual network sections using four conductors, one for each of the four terminals. Depending on what cable you are using this High Frequency method of wiring can improve the resolution of your audio system.
  • Page 5 The C-curve is "flat , but with limited " bandwidth, with -3 dB corners of 31.5 Hz and 8 kHz, respectively. Dynamic Range Many recordings boast a dynamic range of 100dB or more but this is meaningless if you are using your playback system in a typical room.
  • Page 6 As a rule of thumb rooms that have ratios of dimensions to the following numbers will tend to have a more linear spread of room modes therefore be more neutral sounding. 1 : 1.14 : 1.39 1 : 1.28 : 1.54 1 : 1.6 : 2.33 Reverberation Decay of listening rooms (Rt60) In simple terms, reflectivity is the apparent "liveliness"...
  • Page 7 For best results keep the 7001 speakers at least 3 feet away from side walls. The Listening Position For best results the listening position should be about 1/3 of the length of the room from the back wall and should be equidistant from the side walls.

  • Page 8: Specifications

    You should experiment to what is sounding to your idea of transparency. Program Material The 7001 is neutral when it comes to producing sound. It is not slanted to any side of the audio spectrum. It will therefore reveal more about the recordings and the process of how they were recorded more than the producer and artist who created them know.

  • Page 9: General Care

    Never use any solutions with chemical ingredient to clean the speakers. Warranty Information The 7001 speakers come with warranty period of 3 years, starting from the date of purchase. This warranty is provided to original owner, and covers defect in materials or workmanship that occurs in normal use.
  • Page 10 American Acoustic Development LLC www.philjonespuresound.com...