Entering Coordinates; Selecting A Location On The Map; Planning A Multipoint Route; Checking Route Information And Alternatives - Mazda BT-50 Manual

Selecting a location on the map

To select a map location, perform the following steps:
1. Locate your destination on the map. Move and scale the map as
necessary.
2. Tap the location that you want to select as your destination.
The cursor appears there.
3. Optional, if needed, tap 'More' to list the Places near the selected
point or to save this location.
Tip! If you already have a planned route, tap 'More' and 'Select as
Waypoint' to add the selected location to your route.
4. Tap 'Select as Destination' to select the cursor as the destination.
5. The route is calculated and the map appears showing the entire
route, where you can check route information and route
alternatives. Tap 'More' to modify the route parameters, or tap
'Start Navigation' to start your journey.

Entering coordinates

To select a destination by entering its coordinates, perform the
following steps:
1. Press the navigation hard key button to access the Navigation
menu.
2. Tap 'Coordinates'
3. You can enter the latitude and longitude values in any of the
following formats: decimal degrees, degrees and decimal minutes,
or degrees, minutes and decimal seconds. Then Tap 'OK' . Tip!
If necessary, tap 'More' , then 'UTM Coordinates' and enter the
coordinates in UTM format.
22.
4. The route is calculated and the map appears showing the entire
route, where you can check route information and route
alternatives. Tap 'Start Navigation' to start your journey.

Planning a Multipoint Route

To build your route destination-by-destination, perform the
following steps:
1. Press the navigation hard key button to access the Navigation
menu.
2. Tap
3. There is only one line in the list of route points, the starting
point of the route, which is normally the current GPS position.
4. Tap 'Destination' to select the destination.
5. The New Route to... screen appears, where you can select the
destination of the route the same way as described in the previous
sections.
6. If needed, you can add further intermediate destinations.
7. To add more route points, tap 'Insert Waypoint' or tap 'Final
Destination' to change the final destination. The Add to Route...
menu appears again, where you can select the new route point the
same way as you have set the destination before.
8. Optional, tap 'More' to optimise the whole route or the order of
waypoints. You can also delete all the destinations.
9. When you have added all the route points, tap 'Calculate Route'
and the planned route is automatically calculated.

Checking Route Information and Alternatives

To get a map overview of the planned route and check different
parameters of the planned route, perform the following steps:
1. Press the navigation hard key button to access the Navigation
menu.
2. In the Navigation menu, tap
3. The planned route is displayed in its full length on the map with
the following additional information:
• The total length of route
• The total time of route.
4. You have the following options on this screen:
• Tap 'Route Info' to receive detailed information about the route.
If you tap ' A ll' on the right side of the screen, you can narrow the
route information, for example to show only motorway sections
or toll roads.
• Tap ' A lternatives' to list route alternatives and select the most
suitable route for you.
Tap 'More' on the Route Summary screen to carry out additional
actions, for example edit your route preferences or display the
itinerary.

Checking Traffic Events

Offline statistical traffic information (historical speed information
or traffic patterns) can be taken into account in the route
calculation based on the time of day and the day of week if suitable
data can be found on the device. In addition, real-time traffic
information can help you avoid current traffic events like
temporary road closures or traffic jams caused by an accident. Both
functions are subject to data availability. For information on traffic
icons, see page 13.
Road segments affected by traffic events are displayed in a different
colour on the map, and small symbols above the road show the
nature of the event.
To check the traffic summary, perform the following steps:
1. On the Navigation view, tap the traffic icon in the corner (for
example, ) to open the Traffic Summary screen.
2. If there is at least one significant event on the planned route, a
description is displayed about the next event. Tap 'Traffic Events'
to see the list of all events.
3. Tap any of the list items to see its details and to display the
affected road segment in its full length on the map.
To display real-time traffic information on the map, perform the
following steps:
1. On the Navigation view, tap the traffic icon (example above) to
open the Traffic summary screen and tap 'Traffic Map' .
Instructions continued over page.
23.