Advertisement
P61-KBD
2.1 RELEASING OF T
2.1
RELEASING OF THE INSTRUMENT COVER
2.1
2.1
RELEASING OF T
RELEASING OF T
a) Unscrew the four screws from the bottom of the instrument (pic. 2.1-1) and the four screws on the front
panel (pic. 2.1-2).
b) Carefully open the instrument - lift off the instrument's front panel (pic. 2.1-3). Instrument's main board
(KLM475 / KLM-509) is located at left side inside the instrument.
2.2 MIDI
2.2
MIDI- - - - IN SOCKET MONTAGE
IN SOCKET MONTAGE
2.2
2.2
MIDI
MIDI
IN SOCKET MONTAGE
IN SOCKET MONTAGE
There are two possible ways to install the MIDI-IN DIN socket:
If you do not want to mechanically damage the rear panel of the instrument, take out the MIDI cable through
the slot on the left side of the keyboard for example (see pic. 2.2-1).
All rights reserved. No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
MIDI Interface for Korg Poly-61 Keyboard
Pic. 1
Pic. 1 - - - - Electrical connection in the instrument
Electrical connection in the instrument
Pic. 1
Pic. 1
Electrical connection in the instrument
Electrical connection in the instrument
HE INSTRUMENT COVER
HE INSTRUMENT COVER
HE INSTRUMENT COVER
Pic. 2.1- - - - 1 1 1 1
Pic. 2.1
Pic. 2.1
Pic. 2.1
Copyright © 2018 CHD Elektroservis.
Pic. 2.1- - - - 3 3 3 3
Pic. 2.1
Pic. 2.1
Pic. 2.1
4
Model 8-435 ver. 1.0
Pic. 2.1- - - - 2 2 2 2
Pic. 2.1
Pic. 2.1
Pic. 2.1
Advertisement
