GPI GP-1132 Operation Manual

Laser Leveled Marker
Operation Manual
To help you use this instrument quickly, we provide a
specific operation manual for you. Please read the
manual carefully before you use the instrument, and
keep it well.
Thanks for choosing and purchasing Laser Marker, the
precise instrument. To assure the requirement of preci-
sion, please carefully read the manual before you use the
instrument, properly keep this instrument for future
reference.
1
Contents
1. Purpose
2. Safety notice
3. Function and feature
4. Structure of the instrument
5. Operation guideline
6. Self-check of accuracy
7. Technical specification
8. Attachment list
9. Maintenance
1. Purpose
The compact instrument Laser Marker is light-weighted,
easy to carry and operate, with accurate marking
capacity. It is widely applicable to construction and
inspection of interior decoration, building installation,
piping wiring and various fields requiring marking and
positioning.
2. Safety notice
The laser radiation is strong. Do not look at laser beam
directly, avoiding hurting your eyes.
3. Function and Feature
1. Compact, light-weighted, easy to carry and operate,
with accurate marking capacity.
2. Magnetic damping compensator ensures quick
automatic leveling.
3. Transmit one level laser beam and one perpendicu-
lar laser beam with intersecting as a 90 degrees right
angle cross curve, and the perpendicular laser beam
can be extended to exceeding the roof.
4. In case of exceeding leveling scope, laser beam of
the instrument will automatically flash to give
alarm.
4. Structure of the instrument
1. Air bubble
2. Switch button(V/H)
3. Battery case
4. Casing(up)
5. Power( lock button of compensator)
6. Leg adjustment screws
7. Junction Plate
2
1. Air bubble
2. Switch button(V/H)
3. Battery case
4. Casing(up)
5. Power( lock button of compensator)
6. Leg adjustment screws
7. Junction Plate
8. Casing(down)
9. Level laser beam transmitting window
10. Perpendicular laser beam transmitting window
2
4
3
8
5
6
5. Operation guidelines
1. Open the battery case to insert two sets of 1.5V AA
alkaline batteries.(Note the polarity)
2. Properly install the level rotator of the instrument
and put it on the elevating tripod support. Properly
adjust the leveling.
3. Turn the power and the instrument will be on the
automatic leveling condition.
4. Turn the switch button(V/H), level and perpendicu-
lar laser beam will be transmitted.
5. In case the laser beam flashes to give alarm, it
indicates that the instrument isn't smoothly
positioned and exceeds automatic leveling scope. It
is necessary to re-position the instrument and adjust
the elevating tripod or leg screws till the water
bubble go into the circle.
6. Change the batteries in case the power isn't
sufficient.
3
1
10
9
7