6. Installation
Inst alla tio n / S yst em in tegr a tio n
+45 °C
–20 °C
HEAT
STACK
EXCHANGER
6.
Installati on
6.1
Installation Space Requirements
Securely fasten unit and fuel cartridges when using
on board motor vehicles.
Do not operate unit if there is danger of explosion.
Unit is not watertight. Make sure that no water can
enter.
Keep unit and fuel cartridges away from children,
temperatures in excess of 45° C and direct sunlight.
Make sure when choosing an installation space, that
the temperature ranges between –20° C and +45 °C.
The unit requires air from the outside and generates
off-heat that needs to be conducted to the outside.
Please take this into account when considering
possible locations.
1
Air intake for installation space
2
Air intake for heat exchange and for stack
3
Off-heat from heat exchanger
(see chapter 6.3)
4
Exhaust from stack
(see chapter 6.4)
5
Off-heat from installation space
27