RCA E13320 User Manual page 8

Chapter 1: Getting Started
Point and Select
To use the on-screen menus, you need
to know one rule: point and select.
• Use the MENU button to bring up
the menu screen. Use the Arrow
buttons to move the highlight up and
down.
• Press the OK button to choose the
highlighted item.
6
CC This button has no functionality with this product*.
SLEEP Sets the TV to automatically turn off in 30, 60, 90 or 120 minutes. Use the right and left arrow
buttons to choose the amount of time.
INFO Brings up the channel banner.
SKIP (Commercial Skip) Starts an on-screen countdown timer. While the timer is on the screen, you can
browse through other channels. Each press of the SKIP button adds 30 seconds to the timer. When the timer
reaches 0:00, the TV will automatically go back to the channel it was on when the timer was started.
Number Buttons (0-9) Press to access any channel number. To select a channel, press two number buttons.
For example, press 0 then 6 for channel 6. To select a 3-digit number, press and hold number button 1 until
1— appears on the screen. Then press the other two numbers.
INPUT Press to tune to the Audio/Video input. Press again to return to the regular program material. Make
sure the source connected to input jacks is turned on.
*Closed captioning is accessible from the menu system, go to page 8.
Graphics contained within this publication are for representation only. Your unit might differ slightly.