Connection: Tv + Vcr + Satellite Receiver - RCA CR20310 User Manual

Connection: TV + VCR + Satellite Receiver

1. Connect your Satellite Receiver to your TV
A. Connect the white and red audio cables to the AUDIO IN jacks on the back of the TV and to the
B. Connect the video cable (yellow) to the VIDEO IN jack on the back of the TV and to the Video
2. Connect coaxial cables to the Satellite Receiver
A. Connect the coaxial cable from your cable outlet, cable box, or antenna to the Input Jack on your
B. Connect the coaxial cable from your satellite dish antenna to the Input Jack on your satellite
3. Connect the Satellite Receiver to the VCR and to the TV
A. Connect a coaxial cable to the Output Jack (sometimes labeled OUT TO TV) on the satellite
B. Connect a coaxial cable to the Output Jack on the VCR (sometimes labeled OUT TO TV) and to
Chapter 1
SATELLITE RECEIVER
VCR
VIDEO
TV
(back panel)
audio output jacks on the satellite receiver.
Output Jack on the satellite receiver.
satellite receiver (sometimes labeled IN FROM ANT).
receiver (sometimes labeled SATELLITE IN).
receiver and to the Input Jack on the VCR (sometimes labeled IN FROM ANT).
the CABLE/ANTENNA jack on the TV.
Connections & Setup
From Cable or Antenna
OUT
OUT TO TV
VIDEO R L
1B
AUDIO
1A
OUT
R L
IN
R L
INPUTS
ANTENNA
VIDEO
75 OHMS
L
AUDIO
R
2A
CH3
CH4
SATELLITE
IN
2B
3A
Satellite
Signal
IN FROM ANT
CH3
CH4
OUT TO TV
3B
Go to page 9
7