Safety Precautions; Introduction - Mitsubishi Electric MELSEC iQ-F FX5 Programming Manual

SAFETY PRECAUTIONS

(Read these precautions before using this product.)
Before using the FX5 PLCs, please read the manual supplied with each product and the relevant manuals introduced in that
manual carefully and pay full attention to safety to handle the product correctly.
Store this manual in a safe place so that it can be taken out and read whenever necessary. Always forward it to the end user.

INTRODUCTION

This manual describes the instructions and functions required for programming of the FX5. Please read this manual and the
relevant manuals and understood the functions and performance of the FX5 PLCs before attempting to use the unit.
It should be read and understood before attempting to install or use the unit. Store this manual in a safe place so that you can
take it out and read it whenever necessary. Always forward it to the end user.
When utilizing the program examples introduced in this manual to the actual system, always confirm that it poses no problem
for control of the target system.
Regarding use of this product
• This product has been manufactured as a general-purpose part for general industries, and has not been designed or
manufactured to be incorporated in a device or system used in purposes related to human life.
• Before using the product for special purposes such as nuclear power, electric power, aerospace, medicine or passenger
movement vehicles, consult with Mitsubishi Electric.
• This product has been manufactured under strict quality control. However when installing the product where major
accidents or losses could occur if the product fails, install appropriate backup or failsafe functions in the system.
Note
• If in doubt at any stage during the installation of the product, always consult a professional electrical engineer who is
qualified and trained to the local and national standards. If in doubt about the operation or use, please consult the nearest
Mitsubishi Electric representative.
• Since the examples indicated by this manual, technical bulletin, catalog, etc. are used as a reference, please use it after
confirming the function and safety of the equipment and system. Mitsubishi Electric will accept no responsibility for actual
use of the product based on these illustrative examples.
• This manual content, specification etc. may be changed without a notice for improvement.
• The information in this manual has been carefully checked and is believed to be accurate; however, if you have noticed a
doubtful point, a doubtful error, etc., please contact the nearest Mitsubishi Electric representative. When doing so, please
provide the manual number given at the end of this manual.
1