General Maintenance - Spacesaver Eclipse Powered System Owner's Manual

Rails
• Vacuum the rails and track regularly.
• Some flaking may be seen on the rail surface. This is normal
and no cause for alarm. A light application of a silicon or
teflon spray to the top of the rail is recommended to reduce
this type of wear. Avoid sweeping or mopping over freshly
lubricated rails.
Controls
• Check all the functions of every control.
Carriage Bumpers and End Stops
• Please notify your local Spacesaver service technician if you
observe any missing or damaged bumpers and/or stops.
Stored Media
• All materials must be pushed onto the shelves and be flush
with the shelf front. Any media overhanging the shelf front
will interfere with normal system operation. This media is
very likely to become damaged by normal system operation
as well. Looking for evidence of media interference can help
identify potential problems.
Laminate Panels
• To clean and restore the surface apply a countertop or
laminate cleaner (found at most hardware stores.)
Metal Surfaces
• All metal surfaces are painted with the powder coat system.
This is a high luster and scratch resistant paint.
• To remove surface dust, wipe with a damp cloth.
• To clean soiled surfaces, wash with a mild soap and water
mixture.
• To remove finger prints, an orange-based cleaner or NON-
ammonia window cleaner will work on some colors. Test a
small area before using it on a large surface.
Miscellaneous
• Move the carriage in both directions. Look, listen, and feel
for smooth travel. Please inform your local Spacesaver
service technician of any unusual sounds or vibrations.
• All carriages should move easily across the aisle in both
directions.
• Make sure the floor covering does not interfere with carriage
movement or function.
• All carriages should track properly across the aisle. If one
end of the carriage lags behind, please inform your local
Spacesaver service technician.
General
Maintenance
13