Power Outage Options - Spacesaver Eclipse Powered System Owner's Manual

Spacesaver has two options that allow the system to operate
during power outages. You can be assured of continuous access
to your stored material.
Automatic Battery
switches the system to battery
power if AC power is lost. It
provides for full system function,
including the safeties. The system
can operate for approximately 60
accesses on one charge.
When running on the automatic
battery backup, the system
beeps to let the user know it is running on battery power. As
the battery charge runs low, the system beeps faster. The
automatic battery backup provides the added benefit of
surge protection. When the system is back running on AC
power, the unit automatically recharges itself.
The Power Override Unit
battery pack that serves as a backup option during power
outages. This must be plugged into a wall outlet to
recharge. The power override unit moves one carriage at a
time at a reduced speed. The hand-held power override unit
will beep during operation for safety. CAUTION: system
safeties are not functional when using this power option.
Each charge yields approximately one hour of system use. A
battery pack with replaceable D-Cell batteries is also available.
Backup
is a hand-held rechargeable
Rechargeable Battery Override Unit
Replaceable D-Cell Battery Override Unit
Power Outage
Options
11