Operation; Cleaning; Controls - Kenmore 233.5994690 Use And Care/Installation Manual

Always t urn thedowndraft blower onbefore youbegin cook-
ing toestablish anairflow inthekitchen. Let t heblower run for
a fewminutes toclean theairafter y outurnthecooktop o ff.
This willkeep thewhole kitchen c leaner andbrighter.
CONTROLS
_ ARNING: Always disconnect electric power
supply before cleaning unit.
Use a mild detergent suitable for painted surfaces. DO NOT
USE ABRASIVE CLOTH, STEEL WOOL PADS, OR SCOUR-
ING POWDERS. Vacuum blower to clean. Do not immerse
blower in water.
Wash the 2 aluminum grease filters in a mild detergent solu-
tion or a dishwasher. Remove them from the air vent by grasp-
ing the tab at the top of each filter.
I NOTE J
The filters are different sizes. Be sure to replace them as
removed (wider one on the left), with tabs UP.
Turn the downdraft blower ON by pressing down on the acti-
vating switch. The air vent will rise.
KNOB
WARNING: Always disconnect electric power
supply before servicing unit.
It may be necessary to remove the downdraft blower system
from the cabinet in order to service components such as the
blower motor or air vent mechanism.
Disconnect power to the cooktop and remove it first. Reverse
the steps under "MOUNT THE UNIT" to remove the downdraft
from the cabinet.
The blower can be turned ON or OFF and its speed can be
adjusted with the recessed knob on the right side of the air
vent.
Turn the downdraft blower OFF by pressing the activating
switch again. The air vent will go down and the blower will
shut OFF.
5"
I
I NOTE I
For most convenient operation, set the blower to your
favorite speed. The blower will come on to this speed
whenever the activating switch is pressed and the air
vent rises.
rB ;
=-. i
"-t
3