Jacks On The Back Of Your Tv - RCA 15634620 User Manual

Jacks on the Back of Your TV

If you are connecting many components, please consult the manual that came with each
component for connection instructions. The picture of your TV's back panel describes the jacks
on the back of your TV and what types of components that you can connect to these jacks.
When connecting, make sure you connect Output jacks to Input jacks, Video to Video, Right
Audio to Right Audio, etc.
Audio and Video Input Jacks:
AUDIO R and L/MONO and VIDEO
Connect any of the following components:
• DVD Player
• Laserdisc Player
• Internet Access Device
To watch the content from the component that's
connected to the VIDEO Input Jack, press the
WHO • INPUT button on the remote (the TV switches
to the correct channel).
TV (back panel)
G-LINK Jack
Connect the end of the
G-LINK cable (provided)
to this jack. The G-LINK
cable enables the TV's
Guide Plus+ system to
interact with the cable box
and/or the VCR. A picture
of the G-LINK cable is on
page 7.
Chapter 1
• Satellite Receiver
• VCR
AUDIO
VIDEO
R
R
G-LINK
S-VIDEO Jack
Connecting an
S-Video cable is
optional. S-Video
provides better picture
quality than a regular
video cable.
Connections & Setup
Audio Output Jacks:
R and L OUT
Connect audio cables to
these jacks and to an
amplifier or audio receiver
for improved sound quality.
L / MONO
IN
L
OUT
S-VIDEO
CABLE/ANTENNA Jack
Connect the coaxial cable
from the VCR's Output jack to
this jack. If you're not
connecting a VCR, connect a
coaxial cable that carries the
signal from the antenna,
cable, or cable box to the
CABLE/ANTENNA jack.
CABLE/
ANTENNA
13