Advanced Connections; Back Of The Tv - RCA G27669 User Manual

Setup and Connections

Advanced Connections

Advanced connections give you better sound and video by separating
the audio and video signals and enabling you to connect multiple
components.
This section describes the types of inputs available on the back of your
TV and suggests ways you can use them for optimum performance.

Back of the TV

The diagram below describes each of the back panel jacks. When
connecting A/V cables, be sure to connect corresponding OUTPUTS and
INPUTS (Video to Video, Right Audio to Right Audio, etc.).
Connect any one of the following components:
• VCR
• Laserdisc Player
• Satellite Receiver
To view the component connected to VIDEO,
use the WHO•INPUT button on the remote.
VCR Control
Connect the GUIDE Plus+
Gold system IR controller
for one-button recording
and channel tuning from
the GUIDE Plus+ Gold
system.
6
VIDEO and Audio Inputs
• Internet Access Device
• DVD Player
AUDIO
VIDEO
R
R
VCR
CONTROL
S-Video
This optional
connection can
be used for
better video
quality picture.
Audio Outputs
Connect to an audio receiver or
amplifier for variable controlled
or fixed level stereo output.
L / MONO
IN
L
OUT
CABLE/
ANTENNA
S-VIDEO
Takes the signal input from a cable,
cable box, or an off-air antenna. Can also
be used for basic component connections.
Once you have made your connections,
you will need to program the TV to tune
to the correct video input channel in
order to see and hear audio and video
from a component such as a VCR or DVD
player. You will program this later in the
Interactive Setup.
Cable/Antenna