Safety Rules - Ariens 932031 - ST524 Owner's/Operator's Manual

Ariens 932 series sno-thro
Hide thumbs Also See for 932031 - ST524:
Table of Contents

Advertisement

U
NIT
Walk Around Inspection
Complete a walk around inspection of
unit and work area to understand:
• Work area
OL0040
• Your unit
• All safety decals
Clearances
ALWAYS check overhead and side
clearances carefully before operation.
ALWAYS be aware of traffic when
operating along streets or curbs.
OL0830
Work Area
Keep children and people away.
Keep children out of work area and
under watchful care of a responsible
OL1351
adult.
Clear Work Area
Keep area of operation clear of all toys,
pets, and debris. Thrown objects can
cause injury.
OL1021
Avoid Falls
Check for weak spots on dock, ramps
or floors. Avoid uneven work areas and
rough terrain. Stay alert for hidden
hazards.
OL0880
Slippery Surfaces
Avoid slippery surfaces. ALWAYS be
sure of your footing, especially when
operating in reverse.
OL0170
DO NOT operate at high transport
speeds on slippery surfaces. Never run
during operation.
Visual Obstruction
Dust, smoke, fog, etc. can reduce vision
and cause an accident. Operate unit
only when there is good visibility and
light.
OL0340
4
S
AFETY
Ariens
OL0980
OL1910
OL0810
OL3301
OL3620
OL1031
OL3560
932 Series Sno-Thro
®
®
Safety Guards and Devices
ALWAYS keep protective structures,
guards, and panels in good repair, in
place and securely fastened.
NEVER modify or remove safety
devices.
Clutches and Brakes
Check clutch and brake operation
frequently. Adjust and service as
required.
O
S
PERATIONAL
Rules of Operation
Understand:
• How to operate all controls
• The functions of all controls
• How to STOP in an Emergency
Child Safety
NEVER allow children to operate, play
on or near unit.
Be alert and shut off unit if children
enter area.
Pre-Start
Before starting engine: disengage all
clutches, adjust runners to clear surface
safely.
Speed Ranges
DO NOT operate at too fast a rate. DO
NOT change engine governor settings
or over speed engine. Slow down and
turn corners slowly.
Attachment Power
Disengage attachment when not in use.
ALWAYS turn off power to attachment
when transporting, crossing drives, etc.
AFETY
Rev. 8/97

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

932032 - st724

Table of Contents