Modes Of Operation; Setting ºc/24 Hour Or ºf/12 Hour Clock; Setting The Time; Setting The On/Off Temperatures - Regency GV60 User Manual

Modes of Operation

Setting ºC/24 Hour or ºF/12 Hour Clock

Setting the Time

Setting the ON/OFF Temperatures

• - Timer Mode
(Appliance must be in standby mode; pilot ignited.)
The Timers P1 and P2 (Program 1, Program 2) can each be programmed to go ON and
OFF at specific time. For instructions see Timer Programming Mode.
NOTE: The display shows the set temperature every 30 seconds.
• Press OFF and (small flame) button until display changes from Fahrenheit/12 hour clock
to Celsius/24 hour clock and vice versa.
• The Time display will flash after either:
a) Installing the battery or
b) Simultaneously pressing the
• Press (large flame) button to set the hour.
• Press (small flame) button to set the hour.
• Press OFF or simply wait to return to manual mode.
Setting the "Daytime" Temperature
DEFAULT SETTINGS:
Briefly press SET button to scroll to TEMP
•
the TEMP flashes.
(large flame) and
(sun), 23ºC/74ºF
(small flame) buttons.
(sun) mode. Hold the SET button until
CGV60 user guide| 9
user guide