Flame Height Adjustment; To Open And Close Solenoid Valve/Burner - Regency GV60 User Manual

user guide

Flame height adjustment

To open and close solenoid valve/burner

| GV60 user guide
6
Handset
• In standby mode: Press and hold
• Press and hold (small flame) button to decrease flame height or set appliance at pilot flame.
• For fine adjustment tap the
Designated Low Fire and High Fire
• Double-click (small flame) button. <LO> will be displayed.
Note: Flame goes to high fire first before going to designated low fire.
• Double-click (large flame) button. Flame automatically goes to high fire. <HI> will be
displayed.
NOTE: Not available on the HRI3E/LRI3E
NOTE: the latching solenoid valve cannot operate manually. If the battery runs down it will remain
in the last operating position. During normal operation the solenoid valve will be reset to the ON
position when the unit is switched OFF remotely.
(large flame) button to increase flame height.
(large flame) or (small flame) buttons.