Light / dimmer operation (not available on HRI3E/LRI3E)
Circulating Fan Operation
•
Upon ignition Main Burner and Decorative Burner are ON.
•
Simultaneously press SET and
instructions are on the battery cover.
Simultaneously press SET and
•
on the display indicates the solenoid valve is OPEN.)
NOTE: The operation of the AUX is blocked in timer OFF mode. When the setting of the Night-
time Setback Temperature is "--".
Light /Dimmer
•
Briefly press SET button to scroll to
•
Press and hold
(large flame) button to ON the light or increase brightness.
•
Press and hold
(small flame) button to decrease brightness.
In the Light/Dimmer mode, the OFF button shuts OFF the light.
•
If you want the light ON but no flame, press and hold the
•
PILOT flame
NOTE: The light bulb icon is displayed during light/dimmer setting only. 8 seconds after the light/
dimmer has been set, the handset will automatically go into temperature control mode
(CSA version) or manual mode (CE version).
Circulating Fan
The circulating fan has 4 speed levels from low (1 bar) to high (4 bars).
•
Briefly press SET button to scroll to
(large flame) button to switch ON and increase fan speed.
•
Press
(small flame) button to decrease fan speed. To turn OFF fan, press
•
Press
button until all 4 speed level bars disappear.
NOTE: 8 seconds after the fan has been set, the handset will automatically go into temperature
control mode (CSA version) or manual mode (CE version). The fan starts 4 minutes after
the gas opens (from OFF or from PILOT) at maximum speed and goes to the displayed
level after 10 seconds. The fan stops 10 minutes after the gas is OFF or at PILOT.
(small flame) buttons to switch the Burner OFF. Printed
(large flame) button to switch Burner ON. (The AUX symbol
(light bulb) mode. Light bulb icon flashes.
(fan) mode. Fan and Level icons flash.
user guide
(small flame)button and turn to
(small flame)
CGV60 user guide| 7