How To Use; Before Use; Temperature Adjustment - UPO CF105 User Manual

INSTRUCTIONMANUAL

HOW TO USE

BEFORE USE


Remove shipping package, tape, etc, and leave doors open ventilation for a while.

The unit is cleaned before shipment. However, clean the compartment interior once after delivery.
 Please insert power supply plug into the wall outlet, type "earth connected single-phase 230V".

Allow the unit to operate for about 1 hour to cool the compartment before placing items in the
cooler.
WAIT 5 MINUTES ORMORE BEFORE RE-STARTING

Restarting the unit immediately after it has been turned off may cause fuses to blow and activate
the circuit-breaker, the compressor may be overloaded, and/or other damage may occur.

TEMPERATURE ADJUSTMENT


Thermostat was adjusted using temperature at factory. To adjust it, turn right could cause
temperature in freezer down. To raise the temperature, turn it left. Excessive refrigeration will
increase electricity consumption unnecessarily.
EFFICIENT USE
Please follow the following instruction, and you could save energy.

To prevent cold air from escaping, open and close the door quickly and keep the door opened for
as short a time as possible.

Please install the unit in the place which is well-ventilated.
Do not use the unit to store water or food needing water as storage medium.
Never place fresh seafood containing water into the unit directly.
WARNING
33