GE 2-9750/2-9763 User Manual page 14

Problem
Dial tone is OK, but
can't dial out
Handset does not ring
You experience static,
noise, or fading in
and out
Unit beeps
Memory Dialing
12
Solution
• Make sure the TONE/PULSE switch on the base is
correctly set (see p. 3).
• Make sure the RINGER switch on the handset is
turned to ON.
• You may have too many extension phones on your
line. Try unplugging some phones.
• See solutions for "No dial tone."
• Change channels.
• Is handset out of range? Move closer to the base.
• Does the base need to be relocated?
• Charge battery.
• Make sure base is not plugged into an outlet with
another household appliance.
• Place handset in base for 20 seconds to reset the
security code. If that doesn't work, charge battery for
12 hours.
• Clean charging contacts on handset and base with a
soft cloth, or an eraser.
• See solutions for "No dial tone."
• Replace battery.
• Did you program the memory location keys correctly?
See p. 7.
• Did you follow proper dialing sequence? See pp. 7-8.
• Make sure TONE/PULSE switch is correctly set.
See p. 3.
• Did you reprogram numbers into memory after power
outage or replacing battery?