Advertisement
1
Hold down any two buttons
on the MyKey which is the
primary controller, until the LED
lights white; select the green
menu and the purple option
using button three or four.
Confirm with button two.
MyKey_EN__HOL.indd 9
Creating one-way link between products
4
3
2
1
2
Then press three times
quickly on the QEES device to
be linked as a slave unit – the
MyKey LED will light green.
3
Then press three times
quickly on the QEES device
to be linked as the control
device - the MyKey LED
flashes green.
4
Your one-way link has been
created. Now press the
configured QEES control
device and make sure that
your other QEES device is
turned on.
05-07-2012 09:01:52
Advertisement
