Related Manuals for QEES MyKey
Summary of Contents for QEES MyKey
- Page 1 QEES MyKey Online Manual QEES A/S Naverland 2,14 sal. - 2600 Glostrup - Denmark - (+45) 81 41 10 10 - www.qees.eu...
-
Page 2: Table Of Contents
Association of new products to controller groups…………………………………….6 Associating existing products to your MyKey………………………………………..6 Exclusion of a device from network……….………………………………………….7 Creating one way link between products……………………………………………..7 Deleting a link between MyKey and a device………………………………………...7 Controlling devices……………………………………………………………………8 Activating Scenes……………………………………………………………………...8 Controller Shift/Replication.…………………………………………………………..8 Resetting MyKey...……………………………………………………………………9 Bridge Mode…………………………………………………………………………..9... -
Page 3: Introduction
Operating Temperature: -20 Celsius to +50 Celsius Charging QEES MyKey is rechargeable and must be recharged at least 3 hours before use. The battery can be charged by connecting the device to a PC or a USB charger (not included). -
Page 4: How To Make A Selection
4. LED Color Guide. 1. How to make a selection Menu Selection – once you have decided on a menu click on MyKey button 2 and hold the button in order to select it. While you keep the button pressed the LED will switch off and will flash the menu color and show the first action color (usually cyan). -
Page 5: Led Color Guide
Blue Menu (Network Options) In this menu you can perform actions related to the network state of the MyKey. When you want to include/exclude the MyKey to/from your network you go to this menu and select the action that you need. -
Page 6: Purple Menu
5. Red – go back to Menu Selection Point. Purple Menu (Scene Management) In this menu you can create scenes on your MyKey. A scene is a group of devices at a certain state associated to the same button from your MyKey. At this point each time you select this scene the devices will turn to the state they were when the scene was stored. -
Page 7: Exclusion Of Mykey From A Z-Wave Network
In order to remotely control any device you need to include it into your wireless Z- Wave network and associate it to one of the MyKey groups. Please take note that each group is mapped to a button (e.g. group 1 is mapped to button 1, group 2 is mapped to button 2, etc.) -
Page 8: Exclusion Of A Device From Network
1. Go to the green menu on your MyKey and select the purple option; 2. Press 3 times quickly on the QEES device to be linked as a slave unit (the MyKey LED lights green) – the device will send a Node Information Frame;... -
Page 9: Activating Scenes
Activating Scenes MyKey provides to the end user the option to use the “scene” concept. This means that you can assign to a button a certain state of a group of devices. At this point toggling on the scene will take the devices to that specific state. -
Page 10: Resetting Mykey
Resetting MyKey You can reset default settings on your QEES MyKey by going in the Blue Menu and selecting the purple option. This procedure will delete all associations and scenes made on MyKey. -
Page 11: Supported Z-Wave Command Classes
ID of the button to which they are associated on the MyKey: e.g. if you send a "Store Scene" command to the devices in group 2, they will remember those settings in the scene with a Scene ID equal to 2. -
Page 12: Troubleshooting
Note: A slave device can be part of multiple scenes and at different state. It is possible to use the MyKey for activating scenes set up using another controller, by setting the scene ID for a particular group through the Scene Controller Configuration command class. -
Page 13: Specifications
Kultorvet 9, kl. 1175 Kobenhavn, Denmark QEES is in no case liable for: (1) the improper, inappropriate or negligent use of the products by the Buyer or any third party; (2) the failure by the Buyer or any third party to comply with QEES’... - Page 14 QEES Terminology Z-Wave Terminology Add device to network Inclusion Process Remove device from network Exclusion Process Controller Shift Controller Change and Controller Replication QEES A/S Naverland 2,14 sal. - 2600 Glostrup - Denmark - (+45) 81 41 10 10 - www.qees.eu...
Need help?
Do you have a question about the MyKey and is the answer not in the manual?
Questions and answers