Related Manuals for QEES MyKey
Summary of Contents for QEES MyKey
- Page 1 Quick Guide QEES MyKey QEES product referenceres covered by this Quick Guide: 321-IQW-A1 321-IQW-A2 321-IQB-A1 321-IQB-A2 Download complete manual on www.qees.eu/en/support/mykey MyKey_EN__HOL.indd 1 05-07-2012 09:00:19...
- Page 2 There are a myriad of configuration options for QEES The MyKey can also be connected to your PC via an inter- products. Read more on how your QEES product can help face which gives you a complete overview of your wireless you go green at www.qees.eu.
- Page 3 Charging This guide describes the installation of the MyKey. The MyKey is rechargeable The MyKey will light orange When the internal battery and must be charged for at while charging and solid is running low on power, least three hours before use.
- Page 4 Then press three times After successful linking the button that you want to quickly on the QEES device between the MyKey and the use for controlling your you want to control – the device, both LEDs will light device - the LED flashes QEES device now flashes blue green for two seconds.
- Page 5 By repeating configuration products from the same controlled from your MyKey. steps 1-3, you can add button on the MyKey. In order A single press will turn your multiple devices to the other to do so, repeat configuration product on or off. Keep the buttons on your MyKey.
- Page 6 Button 4 Button 3 Button 1 Button 2 Linking existing products to your MyKey Press three times quickly on Then press three times After successful linking The device can now be the MyKey button you want quickly on the QEES device...
- Page 7 Adding MyKey to existing networks Hold down any two buttons On the MyKey to be added After successful linking, both Your MyKey has been added on the MyKey which is the hold down any two buttons devices’ LEDs will light green...
- Page 8 Hold down any two buttons On the QEES device to be The QEES device and the The device is now removed on the MyKey, which is the removed press four times MyKey will now both light from the network and can...
- Page 9 Hold down any two buttons Then press three times Then press three times Your one-way link has been on the MyKey which is the quickly on the QEES device to quickly on the QEES device created. Now press the primary controller, until the LED be linked as a slave unit –...
- Page 10 You can always delete the You can restore the default You can learn more about Scan the QR code to link between MyKey and a settings by holding down any advanced features and other learn much more about device from a specific button two buttons until the LED ways to use the product.
-
Page 11: Technical Data
Technical data QEES MyKey: Certified by Pepper One that guarantees that the product meets the requirements of Z-Wave Supply voltage: Standard USB Charger with Micro USB standard, and thus can control or be controlled connector (not included) or from a USB socket by wireless Z-Wave devices from other Z-Wave via the supplied cable.