Table of Contents
Advertisement
This can be used for short processing jobs to run the blender motor at a high
speed. If hold down the "PULSE" button, default setting "120 10" will
appears on the display and time start to count down. Whenever you release
the button, the unit will stop running and back to "Stand-by" mode. You can
repeat to press / release the button for several times.
2> "ICE" function:
It is working with 0.4 second on and 1.5 second off cycling for ice crushing.
3> "SMOOTHIE" function:
Blender will working with default time 120 second and speed level 10.
7.
After pressing the "ON/OFF" button, following by pressing "Timer", "+speed"/
"-speed" button you can set the working time or speed of the blender.
The default setting of these three buttons is 20 seconds, speed level 5.
When only setting the timer, blender will working on speed level 5. When only
setting the speed, Blender will working with 20 Seconds.
1> Setting the timer:
Press the "TIMER" button once, the display will appears 20 and increase by 20
increments for each press. The sequence is 20 – 40 – 60 – 80 -100 – 120, total
six time level, and then back to 20.
2> Setting the speed:
The speed is divided into 10 levels, from level 1 to level 10. Press the "- SPEED"
or "+ SPEED" button once, the default speed level 5 will appears, and decrease
(5, 4, 3, 2, 1) or increase (5, 6, 7, 8, 9, 10) the speed one level each press.
Press the "ON/OFF" button again to start blender working per the setting time /
speed.
8.
"MENU" functions: by pressing the "MENU"
button after pressing "ON/OFF" button, you
can choose more 6 functions.
Press the "MENU" button once, one of 6
functions (Puree, Cream, Grind, Whip, Chop,
and Stir) will appears in sequence as shown in
the LCD display as above graphic for choosing.
When choosing these functions, the blender will work per the preset program with
deferent ON/OFF cycle time. You can experience it by you self.
Press "ON/OFF" button after choosing the function to start the
In these functions, the time and speed can be re-set when blender is working
www.Ginnys.com
5
blender.
.
Advertisement
Table of Contents
