Ginnys BL-129D Instruction Manual page 3

120v~ 60hz, 700w
Table of Contents

Advertisement

14. Do not use attachments not recommended or sold by the manufacturer.
The use of attachments not recommended by the manufacturer may
cause a risk of injury to persons.
15. This product contains exposed sharp metal blades. Use extreme caution
when handling.
16. Avoid contact with moving parts.
17. Always operate blender with cover in place.
18. Always operate the product on a flat, level, stable surface to avoid
overturning it.
19. Ensure the product is off before adding or removing parts. Do not attempt
to place or remove the jar onto the Base while the motor is running.
20. Correctly attach the blade assembly to the jar before putting the jar onto
the base. To reduce the risk of injury, never place cutter- assembly
blades on the base without jar properly attached.
21. When blending hot liquids, remove center piece of two-piece cover.
Noted: Ensure the hot liquid temperature not exceed 140ºF, and the
maximum liquid capacity less than 40 oz.
22. After operating continuously for two minutes, wait at least one minute
before operating the product again to help prevent the motor from
overheating.
23. Do not run motor while jar is empty.
24. This product is intended for indoor, non-commercial, non-industrial,
household use only. Do not use outdoors.
25. Do not let cord hang over the edge of a table or counter.
26. This product uses a short power cord to reduce the risk of personal injury
resulting from becoming entangled in or tripping over a longer cord.
WARNING: This product is equipped with a polarized plug (one blade is wider
than the other blade) to reduce the risk of electrical shock. This is a safety
feature. The plug will fit into a polarized outlet only one way. If you are unable
to insert the plug into the electrical outlet, try reversing the plug. If the plug still
does not fit, contact a qualified electrician. Never use the plug with an
extension cord unless you can fully insert the plug into the extension cord. Do
not alter the plug. Do not attempt to defeat the safety purpose of the polarized
plug.
SAVE THESE INSTRUCTIONS
www.Ginnys.com
2

Advertisement

Table of Contents
loading

Table of Contents