Table of Contents
Advertisement
Figure 2. Location of the I/O module bays in the Flex System Enterprise Chassis
The connections between the EN6132 adapters that are installed in the compute nodes to the supported
I/O modules that are installed in the chassis I/O bays are shown in the figure below. The figure also shows
both half-wide compute nodes, such as the SN550 with two adapters, and full-wide compute nodes, such
as the SN850 with four adapters.
Mellanox ConnectX-3 and EN6132 2-port 40Gb Ethernet Adapters for Flex System
5
Advertisement
Table of Contents
