Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the guarantee period.
For the cutting of grass lawns. Suitable for medium garden lawns up to 400M . Any other application is considered misuse. 4.2 SPECIFICATION Stock No’s..........................56102 Part No’s..........................LM32 Rated Voltage ......................... 230V~50Hz Rated input ..........................1300W Cutting width ........................320mmØ...
HEALTH AND SAFETY INFORMATION Have this tool repaired by a qualified person. This tool is designed to conform to the relevant international and local standards and as such should be maintained and repaired by someone qualified; using only original parts supplied by the manufacturer: This will ensure the tool remains safe to use.
HEALTH AND SAFETY INFORMATION e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts.
HEALTH AND SAFETY INFORMATION – Keep supply cord away from the blades. Blades can cause damage to the cords and lead to contact with live parts. 1) Training – Read the instructions carefully. Be familiar with the controls and the proper use of the appliances.
HEALTH AND SAFETY INFORMATION – Do not put hands or feet near or under rotating parts. For rotary mowers, keep clear of the discharge opening at all times. Warning: Do not touch the blades before the machine is disconnected from the supply and the blades have come to a complete stop.
Lay the contents out and check them against the parts shown below. If any part is damaged or missing; please contact the Draper Helpline (the telephone number appears on the Title page) and do not attempt to use the machine.
ASSEMBLING THE LAWN MOWER Warning: Do not connect the machine to the power supply before the product is completely assembled. 8.1 FRONT/REAR WHEEL ASSEMBLY – STEPS 1 – 5 The use of a pair of long nose pliers (not supplied) is recommended when assembling the following front/rear wheel components.
It is highly recommended that this machine is used in conjunction with a residual current device (R.C.D) – Draper Stock No.69307. 9.2 SWITCHING ON – STEPS 1 – 2 9.3 CUTTING HEIGHT ADJUSTMENT Warning! Always disconnect the mower from the electrical supply before making any adjustments to the cutting height.
OPERATING INSTRUCTIONS 9.3 CUTTING HEIGHT ADJUSTMENT (continued) Wheel position Cutting height 30mm. 45mm. 60mm. 9.4 GRASS COLLECTION FILL INDICATOR When mowing, frequently check the amounts of collected grass by lifting the small lid the top of the grass collection box. Empty the collection box when grass trimmings are near to capacity.
– Wait until the blade has completely stopped rotating. – Check to see if the blade bolt is loose – tighten if necessary. – If the blade bolt is already tight, contact Draper or service agent. Mower does not – Grass collection box is full – empty the box.
11. EXPLANATION OF SYMBOLS 11.1 EXPLANATION OF SYMBOLS Single value noise marking. (Maximum declared A-Weighted sound power level in decibels). Do not dispose of WEEE* unsorted municipal waste. Class II construction (Double insulated). Warning! Warning! Keep supply cord away from Wear suitable foot protection.
12. DISPOSAL 12.1 DISPOSAL – At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations. – Contact your local authority for details of collection schemes in your area. In all circumstances: •...
Need help?
Do you have a question about the 56102 and is the answer not in the manual?
Questions and answers