Dvd Mode; Stopping Play - Hitachi 32VZC5200 Owner's Manual

DVD Mode

Press the SOURCE button on the back panel, or on the remote control, to switch the
unit to DVD mode.
Basic DVD Movie Playback
• Before placing a disc into the disc compartment, make sure there is no disc inside.
Hold the disc without touching either of its surfaces, position it with the readable
(mirror) side facing towards you, then the disc will automatically enter into the disc
compartment; or you can press the OPEN button on the remote control to put the
disc into the disc compartment.
• Once the disc is in the disc compartment, the player starts reading the disc
immediately.
• When a menu screen appears on the unit, press the / /
number buttons, to select the chapter/track number, then press OK to confirm.
• To stop playing and return to the menu screen, press the TITLE or D.MENU button
on the remote control.

Stopping Play

• Press the STOP button to stop playback.
NOTE: When the player is stopped, it records the point on the DVD where STOP
was pressed (RESUME function). Press the
playback from this point. When the disc is ejected or
the RESUME function will be cleared.
Skipping Ahead or Backward
Skipping ahead: Duri ng playback, press the
Skipping backward: During playback, press the
After Sales Support
Telephone:
Email:
chapter (DVD) or track (Video CD/CD).
previous chapter (DVD) or track (Video CD/CD).
1300 886 649
info@tempo.org
/ buttons, or the
PLAY button again to resume
STOP is pressed again,
button to skip the next
button to skip the
41