Part Number Information - Lenovo ThinkSystem M.2 Product Manual

Part number information

The following table lists the ThinkSystem part numbers.
Table 1. M.2 components
Part Feature
number code
M.2 adapters
7Y37A01092 AUMU
7Y37A01093 AUMV
M.2 drives
7N47A00129 AUUL
7N47A00130 AUUV
7SD7A05703 B11V
* 7Y37A01092 supports a maximum of one M.2 drive; 7Y37A01093 supports a maximum of two M.2
drives; drives must be identical.
The Single M.2 Adapter is shown in the following photo, with the 32GB M.2 drive installed.
Figure 2. Single M.2 Adapter and a 32 GB M.2 drive
Features
Features of the ThinkSystem M.2 solution:
Hardened boot media that does not use a drive bay
Both mechanically & electronically designed to be more robust than any prior implementation
Design provides hardware mirroring of two M.2 SSDs
M.2 SSDs have higher mean time between failures (MTBF) than SD cards or USB keys
Tool-less, patented clip design that supports back to back connector layout, providing simple install
in limited space.
Features of the Dual M.2 Adapter:
PCIe 2.0 x2 host interface (connects to the PCH)
Based on the Marvell 88SE9230 6 Gbps SATA controller
Supports one or two 6 Gbps SATA M.2 drives**
Supports 3 different physical sizes of M.2 drives: 42mm (2242), 60mm (2260) and 80mm (2280)*
RAID functionality provided by the M.2 adapter
RAID 1 by default; also supports RAID 0 and JBOD
UEFI-based settings to enable/disable RAID mode and to review inventory
Supports Secure Boot
Adapter and drive firmware update using Lenovo firmware tools
Management via I2C interface
ThinkSystem M.2 Drives and M.2 Adapters
Description
ThinkSystem M.2 Enablement Kit
(contains the Single M.2 Adapter; supports 1 drive)
ThinkSystem M.2 with Mirroring Enablement Kit
(contains the Dual M.2 Adapter, supports 1 or 2 drives)
ThinkSystem M.2 CV1 32GB SATA 6Gbps Non-Hot-Swap SSD
ThinkSystem M.2 CV3 128GB SATA 6Gbps Non-Hot-Swap SSD
ThinkSystem M.2 5100 480GB SATA 6Gbps Non-Hot-Swap SSD
Maximum
Supported
1
1
1 / 2*
1 / 2*
1 / 2*
2