Setting Up; Charging X5 Evo To 100; Installing X5 Evo On The Bike; Turning On X5 Evo - Xplova X5 Evo User Manual

Charging X5 Evo to 100%

For initial use, you need to charge the built-
in battery (by the provided USB cable) for at
least 5 hours. To prevent corrosion,
thoroughly dry the Micro USB port, weather
cap and the surrounding area before
charging or connecting to a computer.
Please pull out the weather cap from the
Micro USB port with care to avoid breakage.
When charging process is completed,
please ensure to put it back in snuggly.
!
NOTE
• X5 Evo can be charged while using.
Please be aware that the Micro USB
port is not water-resistant. Do not
attempt to charge X5 Evo in the rain or
excessive moisture conditions.

Installing X5 Evo on the bike

To attach X5 Evo on your bike is quick and
easy. Please follow the steps as below:
1. Attach the Extended out-front Bike
Mount on the bike handlebar. Align it
with the bike stem and tighten the
screw. Ensure that the mount is
securely locked and parallel with the
ground level toward the front.
2. Hold X5 Evo firmly and turn it toward the
right. Place it horizontally on the mount
notch and press downward slightly.
S U
ETTING P
3. Turn 90-degrees counterclockwise to
lock it on the bike mount.
4. Eventually, X5 Evo is parallel to your
stem. You can operate with ease.

Turning on X5 Evo

Performing the initial setup


Press and hold the [POWER] button to
activate X5 Evo and follow the on-screen
instructions to configure system settings.
1. Select display language.
2. Select your time zone.
It is recommended to select Set Auto-
matically to set the date and time based
on your time zone.

Setting Up

9