Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zehntner ZGR 2020
Summary of Contents for Zehntner ZGR 2020
- Page 1 ZGR 2020-2024 Grindometer Instruction Manual...
-
Page 3: Table Of Contents
Exclusion of liability Illustrations, descriptions as well as the technical specifications conform to the instruction manual at hand at the time of publishing or printing. However, Zehntner GmbH Testing Instruments policy is one of continuous product development. All changes resulting from technical progress, modified construction or similar are reserved without obligation for Zehntner to update. -
Page 4: Description Of Device
The user bears the full responsibility. Zehntner GmbH Testing Instruments refuses all warranty and liability claims for damages caused by usage of the ZGR 2020-2024 in combination with non-original accessories, or accessories from 3 party suppliers. -
Page 5: Delivery Of Device
Unauthorized modifications and changes of the ZGR 2020-2024 are not allowed. Reproduction without permission is not allowed. For the operation of the ZGR 2020-2024 apply all local safety regulations. Delivery of device 3.1 Damages during carriage At the receipt of the goods, check for any visible damages at the outer packing. If it is unharmed you can sign the receipt of the documents. -
Page 6: Standard Delivery
3.3 Standard delivery Following parts are included in the delivery: grindometer scraper microfiber cleaning cloth certificate of manufacturer carrying case 3.4 Options ZRT 2025 Groove Depth Meter • ACC591 calibration and certification (incl. • certificate) Page 6... -
Page 7: Handling
Handling Place the clean and dry grindometer on a horizontal flat, antiskid surface. • Place the material (free of air bubbles) to be tested in the deep end of the • paths, so that it overflows the paths slightly. Place the scraper edgewise and parallel to the width of the grindometer on •... -
Page 8: Example Of A Reading At The Grindometer
Example of a reading at the grindometer 100 µm 90 µm 80 µm 70 µm 60 µm Fineness of grind: 50 µm 50 µm 40 µm 30 µm 20 µm 10 µm 0 µm Page 8... -
Page 9: Technical Specification
Technical specification Number of Dimensions Versions Depth of the grooves Weight Standards grooves (LxWxH) 0 - 100 µm 8 - 0 EN ISO DIN 2020 (0-3.94 mil) Hegman 1524, ASTM D1210, 0 - 50 µm 8 - 4 2021 ASTM (0-1.97 mil) Hegman D1316,... - Page 10 Number of Dimensions Versions Depth of grooves Weight Standards grooves (LxBxH) grindo- based on: meter: EN ISO DIN 174 x 90 x 13 1524, ASTM 0 - 100 µm D1210, (0-3.94 mil) (6.85” x 3.54” ASTM D1316, 0 - 50 µm ≈1.7 kg x 0.51”) EN 21524...
-
Page 11: Glossary
Glossary Description ........4 Extent of delivery ......6 Damages during carriage ....5 Delivery of device ......5 Description of device ......4 Options ..........6 Exclusion of liability ......3 Reading example ......8 Extent of delivery ......6 Safety information ...... - Page 12 Zehntner GmbH Testing Instruments, Gewerbestrasse 4, CH – 4450 Sissach, Switzerland Tel.: +41 (0)61 953 05 50, Fax: +41 (0)61 953 05 51, zehntner@zehntner.com, www.zehntner.com Version 2.1 dated 21.11.2016...