National Instruments NI PXI-4060 Getting Started Manual page 28

(NI PCI-4060)
1. Remove all front panel connections from the NI PCI-4060.
2. Power off the computer, and remove the device.
3. Remove the four screws that secure the top and bottom insulators onto the device, as shown in
Figure 23.
1 Screws Securing Insulators
4. Remove the top and bottom insulators.
NI Digital Multimeters Getting Started Guide
1 2
2
1
Figure 23. Removing the Insulators from the NI PCI-4060
1
1
2 Insulators
28 ni.com