Display, Magnetic Smart Keys Management Screen - Crescent SC500 Service Manual

Service Manual – SC500

Display, Magnetic Smart Keys Management Screen

The Magnetic Smart Keys Management Screen (Figure 11) allows you to define if the machine can be used
with whatever user key (factory setting) or only with one or more specific user keys.
To switch on the operator mode press the "hare" button
Identify a specific user key to be used for the
machine:
1 Remove the supervisor key (if present) from the
key reader
2 Place the user key on the key reader, then press
the One-Touch button
Remove a specific user key from the list of the keys
to be used for the machine:
1 Remove the supervisor key (if present) from the
key reader
2 Place the user key on the key reader, then press
the brush release button
Figure 11:
To return to the main screen (Figure 7), press the "tortoise" button
05 - Control System, Magnetic Smart Key
Replace the factory setting (whatever user key can
be used for the machine):
1 Remove the supervisor key (if present) from the
key reader
2 Press the brush release button
3 Confirm the command pressing the One-Touch
button
74