Complete The Initial Setup; Set The Menu Language; Set The Signal Source; Complete The Channel Search - RCA L26WD22 User Manual

Connections and Setup

Complete the Initial Setup

Customizing items in the Setup menu allows your TV to perform correctly. Make sure you've
connected the TV to cable or an off-air signal before you continue.
Setup
Signal Source
DTV Signal Strength
Auto Channel Search
Manual Channel Setup
Channel Labels
Menu Language
Screen Format
Favorite Channel
To Move OK To Select
Setup
Signal Source
DTV Signal Strength
Auto Channel Search
Manual Channel Setup
Channel Labels
Menu Language
Screen Format
Favorite Channel
To Move OK To Select
Auto Channel Search Menu
Analog TV Channel 30:
Channels Found:
Progress:
If you have ANALOG and DIGITAL channels,
the TV runs 2 separate channel searches.
16

Set the Menu Language

If English is your preferred language, skip this step and go to Set the
Cable TV u
u
Signal Source.
Start u
u
To choose another language, press the MENU button then press the
u
right arrow button to enter the Setup menu. Press the down arrow
English u
to highlight Menu Language, then press the right arrow to choose a
Stretch
u
Off
u
language. Continue to Set the Signal Source.
MENU To Exit

Set the Signal Source

From the Setup menu, press the up or down arrow button to highlight
Cable TV u
Signal Source. If you connected Cable to your ANTENNA/CABLE
u
u
Start
INPUT, the option is chosen for you and you can press the down
u
arrow button to highlight Auto Channel Search. To choose Air
u
(Antenna), press the right arrow button and then press the down
English u
Stretch u
arrow button to highlight Auto Channel Search.
Off
u
MENU To Exit

Complete the Channel Search

Even though the initial channel search can take time, you must
Found
complete it in order for your TV to display channels and programming.
25
With Auto Channel Search highlighted, press OK to begin the channel
30%
search. The menu shows the TV is running a channel search. The TV
tunes to a program once the search is complete.
Some channels might have been found during the channel search that
are unavailable to view and you might want to get rid of these so they
don't appear as you change channels. To do this, highlight Manual
Channel Setup from the Setup menu. Note that removing channels
from your channel list may be time consuming, so you might want to
do it later. Go to page 34 for details on editing your channel list.
Chapter 1