Get The Picture; Getting Channels - RCA L26WD22 User Manual

Connections and Setup
ANTENNA/
CABLE INPUT
(DIGITAL AND ANALOG)
(The location of the jack varies on your TV's
model.)
Coaxial cable
or
Outdoor or Indoor
antenna
8

Get the Picture

The fi rst part of connecting your TV is to get the picture, also known
as the signal. The back panel of your TV allows you to receive analog
and digital channels by using the ANTENNA/CABLE INPUT.

Getting Channels

What You Need
• Antenna ("rabbit ears") or outdoor antenna with coaxial cable
• Coaxial cable with cable service
A. Do you have an indoor or outdoor antenna? If you don't, go to
step B. If you do, plug the antenna or coaxial cable from the wall
outlet into the ANTENNA/CABLE INPUT to receive free off-air
local digital and analog channels.
B. Do you have cable? If you don't, go to step C. If you do, plug
the coaxial cable from the wall outlet into the ANTENNA/CABLE
INPUT to receive your cable channels.
C. Do you have a set-top box? If you do, you need to call your cable
company or satellite service provider. They may use special cables
to allow you to view digital channels.
What You Need To Know
• Visit www.antennaweb.org to get help deciding what type of
antenna to use to receive the local digital channels available to
you. By entering where you live, this mapping program tells you
what local analog and digital stations are available using a certain
antenna.
• As you change channels, look at the top right corner of the screen
to see what type of channel you're viewing. Digital channels
display a D as part of the channel, such as D Ch 29.1, while
analog channels display an A as part of the channel, such as
A Ch 9. Go to page 16 for more channel information.
OR
Chapter 1