Plug In The Tv; Put Batteries In The Remote; Turn On The Tv; How To Use The Remote Control To Complete The Initial Setup - RCA L42WD22 User Manual

Plug in the TV

Plug the end of the power cord into the back of the TV. Plug the other end into a grounded
wall outlet. Insert the plug completely into the outlet. Do not plug into an outlet controlled by
a light switch.

Put Batteries in the Remote

• Remove the battery compartment cover from the back of the remote by pushing the tab
and lifting off the cover.
• Insert two fresh batteries. Make sure the polarities (+ and -) are aligned correctly.
• Replace the cover.

Turn on the TV

Turn on your TV by pressing the Power button on the front of the TV or ON•OFF on the
remote control.
ON•OFF
PIP
TV
SAT•AUX DVD
GO BACK
VOL
MUTE
INFO
+
MENU CH CTRL
ZOOM-
CLEAR GUIDE
PRESETS
?!+-
DEF
ABC
GHI MNO
JKL
PQRS WXYZ
TUV
INPUT SUB CH
_,.:=$
Tip
To access the setup menus manually, press MENU and
choose Setup.
Chapter 1
How to Use the Remote Control to
Complete the Initial Setup
The technical term is "Navigation" – how you move through the on-
screen menus. The theory is the same throughout the menu screens:
highlight your choice and select it.
CH
To highlight a menu item, press the arrow buttons on the remote to
highlight one of the items listed on the screen. Use the up or down
OK
button arrow button to move up or down. Use the right or left arrow button
to view other selections for a menu choice or to display a sub-menu.
ZOOM+
More than one selection displays, for example, On...; a menu choice
with a sub-menu displays dots (...).
Arrows
Connections and Setup
Note: Highlighted means that the menu item stands out from
other menu items on the list (appears darker, brighter, or a
different color).
13