Connections - Yamaha SWR2100P-10G Owner's Manual

Connections

1.
Connect the LAN port of the network device to the LAN port of this product
using a LAN cable.
2.
Connect the power cord to a power inlet.
Notice
• We recommend that you attach the supplied power cord clamp to prevent the
power cord from accidentally being disconnected.
• This clamp is used only for the supplied power cord.
If you use the clamp for other power cords, they might be damaged or might not
secure properly.
1
Insert the included
clamp into the holes of
the main unit.
3.
Connect the power plug to an electrical outlet.
The POWER indicator lights up.
4.
Turn the power of the network devices connected to this product ON.
If the LINK/ACT indicator corresponding to the LAN port to which the network device is
connected turns green or flashes green, this indicates that the status is normal.
[If the LINK/ACT indicator corresponding to the LAN port does not turn green or
flash green]
Please check that the LAN cable is correctly connected and the power of the
connected network device is ON.
[If the LINK/ACT indicator corresponding to the LAN port flashes orange]
Loop detected. Please check the LAN cable connection.
2
Raise the clamp.
SWR2100P-10G/SWR2100P-5G Owner's Manual
3
Plug in the
power cord.
4
Affix the power
cord in place by
pressing down on
the clamp.
19