Copying Dv To Dv; Connecting Dv Input; Connecting Dv Output - Dazzle Hollywood DV-Bridge User Manual

Copying DV to DV

If you have two DV devices and you want to copy material from one to the other, the most
straightforward way is to connect them directly. However, it might be more convenient to
copy through the Hollywood DV-Bridge. For example, if you already have one or both of your
DV devices connected to the DV-Bridge from a previous procedure, or if both DV devices
have 4 pin to 4 pin connectors and you only have 4 pin to 6 pin cables.To begin copying,
make sure that the Hollywood DV-Bridge is powered up. Then follow the procedures below.

Connecting DV Input

Connect a 1394/FireWire/i.LINK cable from the DV connector on the source DV cam-
corder or VCR to the 1394 connector on the front of the Hollywood DV-Bridge.
Hollywood DV-Bridge
DV VCR or DV Camcorder
VHS
DV Out DV In
Front

Connecting DV Output

Connect a 1394/FireWire/i.LINK cable from the 1394 connector on the back of the Holly-
wood DV-Bridge to the DV connector on the destination DV camcorder or VCR.
Hollywood DV-Bridge
DV VCR or DV Camcorder
VHS
DV In
DV Out
(To AC Power)
Back
Hollywood DV-Bridge User's Guide • Using Hollywood DV-Bridge Without a Computer • Page 56