3. Connect an RCA audio cable (red and white) from the Audio Out connector(s) on the
analog device (camcorder, VCR, or TV) to the Audio In connectors on the front of the
Hollywood DV-Bridge.
Note: Your audio cable may have separate connectors for left and right, or the connec-
tors might be joined as shown in the illustration below. Remember that you need to
use a Y-adapter if the analog camcorder or VCR only supports mono output.
Analog VCR, Camcorder, or TV
VHS
TV
Connecting DV Output
Connect a 1394/FireWire/i.LINK cable from the 1394 connector on the front of the Holly-
wood DV-Bridge to the DV connector on the DV camcorder or VCR.
Analog Device (Input)
VHS
TV
Hollywood DV-Bridge User's Guide • Using Hollywood DV-Bridge Without a Computer • Page 44
Hollywood DV-Bridge
RCA Video In
RCA Video Out
Or
S-Video Out
S-Video In
Audio Out
Audio In
Hollywood DV-Bridge
Or
DV Out
Front
Front
DV VCR or DV Camcorder
DV In
VHS