Hardware Installation - Dazzle Hollywood DV-Bridge User Manual

Hardware Installation

After you install the Dazzle software applications included with the Hollywood DV-Bridge,
you can install the hardware. Installing the Hollywood DV-Bridge hardware is an easy, two
step process, as described below
1. Connect the 1394/FireWire/i.LINK cable from the back of the Hollywood DV-Bridge to
an available 1394 port on your computer.
1394/FireWire/i.LINK Cable
2. Connect one end of the AC power cord to the back of the Hollywood DV-Bridge, and the
other end to an electrical outlet.
Hollywood DV-Bridge User's Guide • Using Hollywood DV-Bridge With a PC • Page 16
Hollywood DV-Bridge
Back
Power Adapter