General Information; Installation - APW Wyott CFHS-16 Installation And Operating Instructions Manual

Fry holding bin cfhs series
Table of Contents

Advertisement

Check the rating label for your model designation and electrical rating. Rating Label is located on
the rear base of the unit.
Overall dimensions:
CFHS-16
Electrical ratings:
Power Cord:
Shipping Weight:
The Fry Holding Station is shipped with the ribbon (model CFHS-21 only), divider and trivet
assembled. Care should be taken when removing unit from box, as ribbon, divider and trivet are
free to move.
1.
Remove unit from shipping container while in the upright position.
2.
Remove all internal packaging.
3.
Inspect bin area for damage. This includes ceramic elements and light
bulbs in overhead assembly .
4.
If
unit
needs
water.
5.
Unit should now have components in place as shown in Figure 1.
6.
Place unit in operating location.
Note
Ambient Conditions
:
Make
sure
ambient temperature is held constant (minimum 70°F).
avoid areas such as near exhaust fans, hoods and air conditioning
ducts.
Warning
:
Ensure that operation location is at a reasonable distance from combustible walls and materials
otherwise combustion or discoloration could occur.
Caution
Operating environment
:
Place unit on a stable counter at a convenient height for use.
not intended to be used as a shelf.
unit.
7.
Before plugging unit into wall, make sure that the switch is in the off or “0” position.
8.
Plug unit into grounded electrical outlet with correct voltage, and plug configuration.

1. GENERAL INFORMATION

22.31”
(56.67 cm)
CFHS-16
CFHS-21
6
foot,
3
wire
manufacturer or an authorized service agent or a similarly qualified person
must replace it in order to avoid a hazard.
CFHS-16
CFHS-21

2. INSTALLATION

to
be
wiped
down
please
that
the
operating
location
Operating environment
CFHS-21
120V AC, 880W, 60Hz, 7.33A, NEMA 5-15 Plug
120V AC, 1130W, 60Hz, 9.42A, NEMA 5-15 Plug
grounded
cord.
If
40.0 lbs. (18.14 kg)
50.0 lbs. (22.68 kg.)
use
damp
cloth
with
is
in
an
area
where
Objects over 25lbs (1 1.33kg) should not be placed on top of
3
the
supply
cord
is
warm
the
Please
Figure 1.
The lid of the Fry Holding Station is
22.70”
(57.66 cm)
damaged,
the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cfhs-21

Table of Contents